Qlogic QLE4062C User Manual

White Paper Implement iSCSI solution in Solaris10 Tim Chung Version 1.2 (OCT, 2009) QSAN Technology, Inc. http://www.qsan.com.tw W

White Paper 5. Next, tell MPxIO driver to accept the device based on the SCSI vendor and Product-ID by editing /kernel/drv/scsi_vhci.conf file. Add t

White Paper SW iSCSI initiator QLogic QLE4062C IOps: 60358 CPU util: 90% IOps: 36585 CPU util: 65% Read MBps: 111 CPU util: 33%

White Paper lntroduction In this document, it describes how to connect an iSCSI target in Solraris 10 via software iSCSI initiator and QLogic QLE4062

White Paper Installation Part 1: QLogic QLE4062C 1. Please look at QLogic website first. (There are some useful links in Reference.) Please follow

White Paper 2. Add iSCSI portal as the discovery target of each port on HBA. 3. Save the changes and refresh the HBA. - 4 -

White Paper 4. Refreshing HBA settings will let the iSCSI target connect automatically. 5. The HBA detects a dynamic target. Make sure to save

White Paper 6. Reboot Solaris to let the newly added LUNs be found. 7. Run the following command after reboot. # grep qla4xxx /var/adm/message

White Paper # grep qla4xxx /var/adm/messages Feb 10 10:30:19 hostname:[ID xxxxxx kernel.info] sd10 at qla4xxx target2 lun0 Feb 10 10:30:19 hostname:[

White Paper # vi /kernel/drv/sd.conf ... name=”sd” class=”scsi” target=0 lun=0; name=”sd” class=”scsi” target=1 lun=0; name=”sd” class=”scsi” target=

White Paper # iscsiadm modify initiator-node –authentication CHAP 7. To remove the iSCSI SendTarget discovery entry. # iscsiadm remove discovery-ad