Qlogic QLogic 12000 Series Specifications Page 85
- Page / 144
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Switch Command Line Interface
Groups and Commands
D000103-000 E 1-77
smLogMode
Displays or dynamically sets the Subnet Manager logging mode.
Syntax:
Options:
Sample Output:
NOTES:
0 - use normal logging levels
1 - logging is quieted by downgrading the majority of fatal, error, warn and infiniinfo
log messages to level
3 (INFO) and only outputting user actionable events when LogLevel is 1 or 2.
The Subnet manager must be running to use this command. Changes made with
this command will only affect the currently running SM, and will will be forgotten if
the FM is restarted or the chassis is rebooted. To make persistent changes edit the
FM XML config file.
smLogMask
Displays or dynamically sets the Subnet Manager logging mask for a specific subsystem.
Syntax:
Options:
Sample Output:
smLogMode [<logmode>]
logmode
logging mode 0 or 1
-> smLogMode 1
smLogMask <subsystem> [<mask>]
subsystem
The Fabric Manager (FM) subsystem.
mask
The bit mask needed for logging to enable.
-> smLogMask SM
- QLogic 12000 Series 1
- Document Revision History 2
- Table of Contents 3
- Intended Audience 5
- Documentation Conventions 5
- License Agreements 6
- Technical Support 6
- Training 7
- Contact Information 7
- Knowledge Database 7
- viii D000103-000 E 8
- 1 Switch Command Line 9
- Switch Command Line Interface 10
- 1-2 D000103-000 E 10
- D000103-000 E 1-3 11
- Online Help 12
- Keyboard Shortcuts 12
- Operator access: operpass 13
- -> reboot 17
- Disruptive reboot selected 17
- Proceed with reboot? [N] 17
- -> swapBsDel 20
- The new prompt 21
- -> case off 22
- Case sensitivity is now off 22
- -> showLastRetCode 22
- Last Exit Code: 0: Success 22
- Text to be echoed 23
- Chassis slot number 24
- -> user operator 25
- User changed to: operator 25
- -> passwd operator1 26
- -> userAdd admin Bob 26
- User added: Bob 26
- -> sshKey show 28
- Index Key 28
- "192.168.0.1" 29
- -> setldapSvrPort 389 30
- -> idleTimeoutGet 30
- Timeout is 600 seconds 30
- -> sessionTimeoutDisable 31
- -> sessionTimeoutEnable 32
- Enabled session idle timeout 32
- -> loginMsgGet 32
- Clear welcome message 33
- Set the login name 34
- Clear the login name 34
- Enable or disable ftp access 35
- -> IpoIbConfigShow 37
- -> IpoIbConfigEnable 37
- -> IpoIbConfigDisable 37
- -> IpoIbAddressShowIPv6 39
- -> hwCheck 40
- Chassis hardware status: GOOD 40
- Use 0 or 1 to set the format 42
- -> setIBNodeDescFormat 43
- Format = 0 43
- -> fruInfo 43
- MasterMM202-> chassisQuery 44
- System contact string 45
- System name string 46
- System location string 46
- The network interface name 47
- -> showChassisIpAddr 50
- Network mask length. (0-128) 51
- -> showChassisIpv6Addr 52
- -> autoConfIPv6Enable 52
- -> autoConfIPv6Disable 52
- -> autoConfIPv6Show 53
- -> ndpShow 53
- -> showDefaultRoute 53
- D000103-000 E 1-47 55
- -> hostShow 56
- DNS Resolver : Disabled 59
- Firmware 60
- -> fwListFiles 62
- Listing Directory /firmware: 62
- All slots in the chassis 64
- Slot number 64
- Subnet Management 67
- Saving 68
- Saving complete 68
- -> smPriority 69
- The SM Priority is 0 69
- -> smSweepRate 300 69
- -> smForceSweep 70
- -> bmForceSweep 70
- -> smMasterLMC 74
- -> smShowMasterLid 74
- The SM LID is 0x0001 74
- -> smSwitchLifetime 15 76
- -> smHoqLife 9 76
- -> smVLStall 5 77
- -> smInfoKey 79
- -> smMgmtKey 0x11 79
- Clears all set options 80
- -> smGidPrefix 81
- -> smSubnetSize 81
- -> smTopoErrorThresh 100 82
- -> smTopoAbandonThresh 3 82
- -> smNonRespDropSweeps 3 84
- -> smNonRespDropSweeps 84
- -> smLogLevel 4 84
- -> smLogMode 1 85
- -> smLogMask SM 85
- -> smMcLidTableCap 1024 86
- Set mc lid limit to 1024 86
- -> smMcLidTableCap 86
- Mc lid limit: 1024 86
- -> smAppearanceMsgThresh 91
- -> smAppearanceMsgThresh 3 91
- -> pmShowCounters 94
- -> pmResetCounters 94
- -> pmShowRunningTotals 94
- Restore normal SM priority 96
- Restore normal BM priority 96
- Restore normal PM priority 96
- 1-90 D000103-000 E 98
- -> logClear 100
- Ram Log cleared 100
- Groups and Commands 101
- D000103-000 E 1-93 101
- Sample Output: 101
- -> logResetToDefaults 102
- D000103-000 E 1-95 103
- -> logSyslogTest -e 105
- Key Management 106
- D000103-000 E 1-99 107
- Options: 107
- IbSwitchInfo 108
- D000103-000 E 1-101 109
- -> ismPortCounters -errors 110
- No ports with symbol errors 110
- Switch identifier 113
- -> ismAutoClearConf enable 114
- Auto clear is enabled 114
- -> ismPortSet12x S1AL01a 114
- S1AL01a 12x mode is DISABLED 114
- Port name 116
- 1=enable, 0=disable 117
- 4=2048 bytes, 5=4096 bytes 119
- The numeric threshold value 122
- -> ismRemoveStateDump all 124
- 1=on, 0=off 127
- -> ismChassisBounce 128
- TimeManagement 130
- New timeout setting 132
- New refresh delay setting 132
- D000103-000 E 1-125 133
- A read-only community string 134
- RFC 2573 135
- SNMP-TARGET-MIB, RFC-2573 136
- CaptureInfo 140
© 2020, manymanuals.com. All rights reserved. | 0.049 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals