Qlogic QLA2300 User Manual download pdf (Page 8)

Part Tag Flag Cylinders Size Blocks

0 root wm 0 - 8738 4.00 GB

(8739/0/0)

8389440

1 swap wu 8739 - 9188 210.94 MB

(450/0/0)

432000

2 backup wu 0 - 9201 4.21 GB

(9202/0/0)

8833920

3 unassigned wm 0 0

(0/0/0)

4 unassigned wm 0 0

(0/0/0)

5 unassigned wm 0 0

(0/0/0)

6 unassigned wm 0 0

(0/0/0)

7 unassigned wm 0 0

(0/0/0)

label

quit

3. Use the newfs command to create the file system.

Example:

newfs -v /dev/rdsk/c3t130d0s0

NOTE: The target device Id (t130) is in decimal! The hexadecimal value for the target Id is used in the boot

command line shown in step 11.

4. Mount the boot partition to the /mnt mount point.

Example:

mount /dev/dsk/c3t130d0s0 /mnt

5. Change directory to the root partition mount point.

Example:

cd /mnt

6. Use the ufsdump utility to copy the root partition to the new boot disk.

Example:

ufsdump 0f - / | ufsrestore rf -

7. Enter: rm restoresymtable.

8. Install the boot block on the new boot disk.

Example:

installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk

/dev/rdsk/c3t130d0s0

1 2 3 4 5 6 7 8 9

No comments

Qlogic QLA2300 User Manual Page 8