Qlogic QLA22xx board Installation Guide download pdf (Page 28)

QL2200IP NDIS Network Driver Installation 5 – Windows 2000 Driver Installation

5-6 FC0153302-00 D

19. Specify an IP address and subnet mask for each adapter on the network.

Each IP address must be unique and all adapters must use the same subnet

mask. For example:

Adapter 1

IP address: 10.0.0.1

Subnet mask: 255.255.0.0

Adapter 2

IP address: 10.0.0.2

Subnet mask: 255.255.0.0

20. Click OK to close the TCP/IP Properties dialog box.

21. Click OK.

5.5.2

Updating the QL2200IP NDIS Network Driver

Perform the following steps if a QL2200IP NDIS network driver is already installed

and you want to install an updated version of the driver.

1. Open a DOS command prompt window.

2. Change the current directory to the Windows 2000 driver directory. For

example:

CD \WINNT\SYSTEM32\DRIVERS

3. Make a backup copy of the old driver. You can copy the file into the same

directory with a .SAV extension indicating that it is the saved file. For

example:

COPY QL2200IP.SYS QL2200IP.SAV

4. Insert the diskette that contains the updated QLogic driver into an

appropriate drive.

5. Copy the new driver over the old driver. For example:

COPY A:\W2K\IP\QL2200IP.SYS

6. Remove the diskette that contains the QLogic driver.

7. Reboot your system to load the updated driver.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

No comments

Qlogic QLA22xx board Installation Guide Page 28