Qlogic SilverStorm 9000 Specifications

D000025-002 Rev. ASilverStorm 9000CLI Reference Guide

2 – Switch Command Line InterfaceOnline Help2-4 D000025-002 Rev. ASOnline HelpThe online help for the CLI provides, for each command, all necessary in

2 – Switch Command Line InterfaceGroups and Commands2-94 D000025-002 Rev. ASNOTE: This command will set the MTU capability for both internal and exter

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-95ASample Output:NOTE: The following are the available port statics threshold

2 – Switch Command Line InterfaceGroups and Commands2-96 D000025-002 Rev. AS 18 portExcBufferOverrun: excessive buffer overrun errors  19 portRelaye

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-97A portRawViolOut  portLocalLinkInteg  portExcBufferOverrun  portRelayed

2 – Switch Command Line InterfaceGroups and Commands2-98 D000025-002 Rev. ASismShowStateDumpShows contents of switch ASIC state dumps.Syntax:Options:S

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-99ATimeManagementtimeConfigure the time on the device.Syntax:Options:Sample O

2 – Switch Command Line InterfaceGroups and Commands2-100 D000025-002 Rev. ASNOTE: The offset parameter specifies a time zone the system should use wh

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-101ASyntax:Options:Sample Output:NOTE: With no arguments, this command displa

2 – Switch Command Line InterfaceGroups and Commands2-102 D000025-002 Rev. AScommand with the new refresh time (in whole seconds) as the only argument

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-103ASNMPsnmpCommunityConfDisplays and allows the changing of the SNMP communi

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-5A3. The system prompts for a password. The CLI has the following default pas

2 – Switch Command Line InterfaceGroups and Commands2-104 D000025-002 Rev. ASOptions:Sample Output:NOTE: The output is in the form: 'mib : mib_ob

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-105AsnmpTargetParamsDisplays the snmpTargetParamsTable entries.Syntax:Options

2 – Switch Command Line InterfaceGroups and Commands2-106 D000025-002 Rev. ASNOTE: The output is in the form: 'mib : mib_object : table_index : v

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-107ASample Output:NOTE: The output is in the form: 'mib : mib_object : t

2 – Switch Command Line InterfaceGroups and Commands2-108 D000025-002 Rev. ASNOTE: The output is in the form: 'mib : mib_object : table_index : v

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-109ACapturecaptureDisplay information for this device.Syntax:Options:NOTE: Th

2 – Switch Command Line InterfaceGroups and Commands2-110 D000025-002 Rev. AScaptureSmDisplay Subnet Management information for this device.Syntax:Opt

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-111AOptions:NOTE: This command is intended for support personnel.captureMiscD

2 – Switch Command Line InterfaceGroups and Commands2-112 D000025-002 Rev. AS

D000025-002 Rev. A 3-13 Virtual I/O Command Line InterfaceOverviewThis section details the usage of the Command Line Interface (CLI) feature for the E

2 – Switch Command Line InterfaceGroups and Commands2-6 D000025-002 Rev. ASSample Output:NOTES: General HelpType list or ? for the list of commands.To

3 – Virtual I/O Command Line InterfaceCommands and Functional Groups3-2 D000025-002 Rev. ASSubnetManagement: InfiniBand subnet manager configuration a

3 – Virtual I/O Command Line InterfaceOnline HelpD000025-002 Rev. A 3-3AOnline HelpThe online help for the CLI provides, for each command, all necessa

3 – Virtual I/O Command Line InterfaceGroups and Commands3-4 D000025-002 Rev. ASAdministrator access: adminpassType the appropriate password and press

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-5ASample Output:NOTE: cardInfo is a related command.cardNonFatalErrGetDi

3 – Virtual I/O Command Line InterfaceGroups and Commands3-6 D000025-002 Rev. ASSample Output:NOTE: cardInfo is a related command.cardUptimeGetDisplay

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-7AcardDescSetModifies the linecard description.Syntax:Options:Sample Out

3 – Virtual I/O Command Line InterfaceGroups and Commands3-8 D000025-002 Rev. AScardAliasSetModifies the linecard Alias.Syntax:Options:Sample Output:N

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-9AOptions:Sample Output:NOTE: cardInfo is a related command.cardCardDesc

3 – Virtual I/O Command Line InterfaceGroups and Commands3-10 D000025-002 Rev. ASNOTE: cardInfo is a related command.cardContactGetDisplays linecard c

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-11AOptions:Sample Output:NOTE: cardInfo is a related command.cardNameSet

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-7AOptions:Sample Output:NOTES: Specify the group name or use the option all t

3 – Virtual I/O Command Line InterfaceGroups and Commands3-12 D000025-002 Rev. ASNOTE: cardInfo is a related command.cardLocationSetModifies the linec

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-13AFirmwarefwVersionDisplays the firmware versions for a unit.Syntax:Opt

3 – Virtual I/O Command Line InterfaceGroups and Commands3-14 D000025-002 Rev. ASbootQueryDisplays boot image version information.Syntax:Options:Sampl

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-15ASample Output:-> bootSelect 103 -nopromptCurrently installed firmw

3 – Virtual I/O Command Line InterfaceGroups and Commands3-16 D000025-002 Rev. ASLogNOTE: For detailed information on commands for the Log group, refe

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-17AcaptureSmDisplays all available subnet manager information for module

3 – Virtual I/O Command Line InterfaceGroups and Commands3-18 D000025-002 Rev. ASOptions:NOTE: This command is intended for support personnel.captureF

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-19AFibreChannelfcPortSpeedGetRetrieve the Fibre Channel port speed setti

3 – Virtual I/O Command Line InterfaceGroups and Commands3-20 D000025-002 Rev. ASSample Output:fcPortTopologyGetRetreive the Fibre Channel port topolo

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-21AOptions:Sample Output:fcPortAliasGetRetrieves the Fibre Channel port

2 – Switch Command Line InterfaceGroups and Commands2-8 D000025-002 Rev. ASSample Output:rebootReboots the device.Syntax:Options:Sample Output:-> h

3 – Virtual I/O Command Line InterfaceGroups and Commands3-22 D000025-002 Rev. ASSample Output:fcPortAliasSetChanges the Fibre Channel port alias (nam

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-23AfcDeviceDiscoveryStartInitiates a discovery cycle for Fibre Channel d

3 – Virtual I/O Command Line InterfaceGroups and Commands3-24 D000025-002 Rev. ASOptions:Sample Output:fcDiscoveredDeviceConfigConfigure Fibre Channel

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-25ASample Output:fcConfiguredDeviceRename Rename Fibre Channel devices t

3 – Virtual I/O Command Line InterfaceGroups and Commands3-26 D000025-002 Rev. ASfcSrpDiscoveredInitiatorsGetDisplays the SRP Initiators found during

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-27ASample Output:fcDiscoveredSrpInitiatorConfigConfigure a discovered SR

3 – Virtual I/O Command Line InterfaceGroups and Commands3-28 D000025-002 Rev. ASfcSrpInitiatorCreateCreate an new SRP Initiator by specifying the GUI

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-29AfcSrpMapShowConnectionsRetrieve SRP initiator connection information.

3 – Virtual I/O Command Line InterfaceGroups and Commands3-30 D000025-002 Rev. ASSample Output:-> fcSrpMapConfigGetInitiator 1, (st96) using GUID:

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-31AfcSrpMapConfigCreateCreate and configure a new SRP map association.Sy

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-9ANOTES: You may reboot the local (Master) Spine or the remote (Slave) Spine

3 – Virtual I/O Command Line InterfaceGroups and Commands3-32 D000025-002 Rev. ASfcSrpMapConfigStatusChange the status of a map.Syntax:Options:Sample

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-33AOptions:Sample Output:NOTE: The specified SRP map must be explicit ty

3 – Virtual I/O Command Line InterfaceGroups and Commands3-34 D000025-002 Rev. ASSample Output:NOTE: The specified SRP map must be explicit type and a

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-35AOptions:Sample Output:NOTE: If there is only 1 LUN in an Explicit map

3 – Virtual I/O Command Line InterfaceGroups and Commands3-36 D000025-002 Rev. ASfcTargetDeviceStatsGetDisplay the Fibre Channel Target Device statist

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-37AfcSrpInitiatorStatsGetDisplay the SRP Initiator Statistics.Syntax:Opt

3 – Virtual I/O Command Line InterfaceGroups and Commands3-38 D000025-002 Rev. ASfcPortStatsGetDisplay Fibre Channel Port Statistics.Syntax:Options:Sa

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-39ASample Output:fcTrapEnableEnable specified Fibre Channel traps.Syntax

3 – Virtual I/O Command Line InterfaceGroups and Commands3-40 D000025-002 Rev. ASfcTrapGenerate Generate a specified Fibre Channel trap.Syntax:Options

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-41ASample Output:-> fcVirtPortShowWWN Key: T4WD5G-S6A5U2-QA28A7-32QKS

2 – Switch Command Line InterfaceGroups and Commands2-10 D000025-002 Rev. ASSample Output:NOTES: Displays a list of currently active CLI sessions. No

3 – Virtual I/O Command Line InterfaceGroups and Commands3-42 D000025-002 Rev. ASfcVirtPortNameSet Set the text name field of the virtual portSyntax:O

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-43ASample Output:NOTE: The virtual port must be inactive for the assignm

3 – Virtual I/O Command Line InterfaceGroups and Commands3-44 D000025-002 Rev. ASSample Output:NOTE: To enable this feature, acquire the feature key f

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-45AEthernetethMtuGetRead the current and saved maximum transfer unit (MT

3 – Virtual I/O Command Line InterfaceGroups and Commands3-46 D000025-002 Rev. ASethViPortsGetDisplays the VIPORT counts.Syntax:Options:Sample Output:

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-47AethExtPauseGetRead whether PAUSE is enabled or disabledSyntax:Options

3 – Virtual I/O Command Line InterfaceGroups and Commands3-48 D000025-002 Rev. ASethExtPrioritySetSet default user priority for the specified ethernet

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-49AethVirtPrioritySetModifies the default user priority for the specifie

3 – Virtual I/O Command Line InterfaceGroups and Commands3-50 D000025-002 Rev. ASSample Output:NOTE: Prints various statistics for a specified externa

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-51AethVirtStatsGetPrint statistics for a specified virtual port(s).Synta

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-11AswapBsDelSwaps the backspace and delete character key bindings.Syntax:Opti

3 – Virtual I/O Command Line InterfaceGroups and Commands3-52 D000025-002 Rev. ASvlanDot1qPvidGetView/Set VLAN Dot1qPvid for a port.Syntax:Options:NOT

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-53AvlanMapTaggedGetShow VLAN PVID tagged map.Syntax:Options:Sample Outpu

3 – Virtual I/O Command Line InterfaceGroups and Commands3-54 D000025-002 Rev. ASvlanMapTaggedSetUpdate VLAN PVID tagged map.Syntax:Options:NOTE: Upda

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-55ASample Output:NOTE: Displays the VLAN PVID member map for Ethernet or

3 – Virtual I/O Command Line InterfaceGroups and Commands3-56 D000025-002 Rev. ASNOTE: Updates the VLAN PVID member map for Ethernet or virtual port(s

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-57AvlanEgressRuleGetView/Set VLAN Egress rule(s).Syntax:Options:Sample O

3 – Virtual I/O Command Line InterfaceGroups and Commands3-58 D000025-002 Rev. ASvlanEgressRuleSetView/Set VLAN Egress rule(s).Syntax:Options:NOTE: Di

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-59ASample Output:NOTE: Displays the VLAN Ingress rule flag for port(s) (

3 – Virtual I/O Command Line InterfaceGroups and Commands3-60 D000025-002 Rev. ASvlanIngressFrameGetView/Set VLAN Ingress Frame type.Syntax:Options:NO

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-61AethMaxPacketAgeGetShow the maximum packet age for a LAN switch.Syntax

2 – Switch Command Line InterfaceGroups and Commands2-12 D000025-002 Rev. ASgetTermWidthDisplays the terminal width for text formatting purposes.Synta

3 – Virtual I/O Command Line InterfaceGroups and Commands3-62 D000025-002 Rev. ASvlanGetView VLAN configuration.Syntax:Options:Sample Output:NOTE: Vie

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-63AvlanSetSet the VLAN configuration.Syntax:Options:vlanSet <type>

3 – Virtual I/O Command Line InterfaceGroups and Commands3-64 D000025-002 Rev. ASSample Output:NOTE: Configures a VLAN for a host and IOC pair. Relate

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-65ASample Output:NOTE: Removes a VLAN configuration from a host and IOC

3 – Virtual I/O Command Line InterfaceGroups and Commands3-66 D000025-002 Rev. ASSample Output:NOTE: Prints information for the specified external Eth

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-67ASample Output:NOTE: Prints information for the specified virtual port

3 – Virtual I/O Command Line InterfaceGroups and Commands3-68 D000025-002 Rev. ASSample Output:NOTE: Prints information for Ethernet ports.ethVirtInfo

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-69AethExtMirrorGetPrint mirror information for the specified Ethernet po

3 – Virtual I/O Command Line InterfaceGroups and Commands3-70 D000025-002 Rev. ASNOTE: Sets up a mirror between the specified monitor and mirror exter

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-71AethExtEnableEnable an Ethernet port(s).Syntax:Options:Sample Output:N

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-13AcaseDisplay or change the case sensitivity for the command interpreter for

3 – Virtual I/O Command Line InterfaceGroups and Commands3-72 D000025-002 Rev. ASethExtCurrentSpeedGetDisplay the speed/duplex mode currently in use b

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-73APartnerKey: 802.3ad partner key. PartnerID: 802.3ad partner system Id

3 – Virtual I/O Command Line InterfaceGroups and Commands3-74 D000025-002 Rev. ASethExtLacpDisableDisable 802.3ad for the specified Ethernet port.Opti

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-75AethExtLacpKeyGetRead the 802.3ad Lacp actor key for the specified por

3 – Virtual I/O Command Line InterfaceGroups and Commands3-76 D000025-002 Rev. ASNOTE: 802.3ad allows for ports to be configured with an actor key, de

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-77AOptions:Sample Output:NOTE: Link aggregation can be configured on a p

3 – Virtual I/O Command Line InterfaceGroups and Commands3-78 D000025-002 Rev. ASSample Output:NOTE: When an external Ethernet link is removed or othe

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-79ANOTE: When an external Ethernet link is removed or otherwise goes dow

3 – Virtual I/O Command Line InterfaceGroups and Commands3-80 D000025-002 Rev. ASethVirtAssignedHostSetSet assignment of the virtual port.Syntax:Optio

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-81AethVirtAssignedHostRemRemove assignment of the virtual port.Syntax:Op

Page ii D000025-002 Rev. AS© 2008 QLogic Corporation. All Rights Reserved Worldwide.First Published: September 2007QLogic Corporation, 26650 Aliso Vie

2 – Switch Command Line InterfaceGroups and Commands2-14 D000025-002 Rev. ASechoEchoes text back to the output..Syntax:Options:Sample Output:NOTES: Th

3 – Virtual I/O Command Line InterfaceGroups and Commands3-82 D000025-002 Rev. ASNOTE: Displays the port alias for all specified Ethernet ports. The

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-83ANOTE: Show IGNORE VLAN flag for a host port. The port parameter can b

3 – Virtual I/O Command Line InterfaceGroups and Commands3-84 D000025-002 Rev. ASethVirtIgnoreVlanRemAllows the user to remove the IGNORE VLAN flag fo

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-85AethVirtVnic2McastSetEnables the Vnic2Mcast feature for a virtual port

3 – Virtual I/O Command Line InterfaceGroups and Commands3-86 D000025-002 Rev. ASethVnic2McastMtuGet Reads the current Vnic2Mcast MTU size.Syntax:Opti

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-87AethVnic2McastRateGetReads the current Vnic2Mcast rate setting used du

3 – Virtual I/O Command Line InterfaceGroups and Commands3-88 D000025-002 Rev. ASConfigurationconfFileSave Saves the current configuration to a file o

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-89AconfFileCommit Loads and commits a configuration file to memory.Synta

3 – Virtual I/O Command Line InterfaceGroups and Commands3-90 D000025-002 Rev. ASOptions:Sample Output:NOTE: Displays the contents of a configuration

3 – Virtual I/O Command Line InterfaceGroups and CommandsD000025-002 Rev. A 3-91AconfFileRetrieve Retrieve a configuration file from an FTP server.Syn

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-15ArcmdCreates I/O terminal to local cards.Syntax:Options:Sample Output:NOTES

3 – Virtual I/O Command Line InterfaceGroups and Commands3-92 D000025-002 Rev. AS

2 – Switch Command Line InterfaceGroups and Commands2-16 D000025-002 Rev. ASOptions:Sample Output:userChange user accounts.Syntax:Options:Sample Outpu

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-17AuserAddAdd a user account.Syntax:Options:Sample Output:userRemRemove a use

2 – Switch Command Line InterfaceGroups and Commands2-18 D000025-002 Rev. ASOptions:Sample Output:sshKeySyntax:Options:Sample Output:NOTES: Adds, disp

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-19AloginModeAllows the user to change the user interface authentication requi

2 – Switch Command Line InterfaceGroups and Commands2-20 D000025-002 Rev. ASNOTES: This sets the ldap server ip address. The ldap server will be conta

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-21AidleTimeoutSetSet the UI idle timeout value.Syntax:Options:Sample Output:N

2 – Switch Command Line InterfaceGroups and Commands2-22 D000025-002 Rev. ASsessionTimeoutEnableEnable the idle timeout for the CLI session.Syntax:Opt

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-23AOptions:Sample Output:NOTES: This command can be used to modify the welcom

D000025-002 Rev. A Page iiiTable of Contents1 IntroductionIntended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 – Switch Command Line InterfaceGroups and Commands2-24 D000025-002 Rev. ASSample Output:NOTES: The login name is an arbitrary string displayed prior

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-25AuiConfigView or configure the user interfaces to this device.Syntax:Option

2 – Switch Command Line InterfaceGroups and Commands2-26 D000025-002 Rev. ASIpoIbConfigShow (9000 MPFD only)Displays the IpoIb Enable/Disable setting.

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-27ASample Output:IpoIbAddressSet (9000 MPFD only)Change the IpoIb IP address

2 – Switch Command Line InterfaceGroups and Commands2-28 D000025-002 Rev. ASChassishwCheckRuns a system check at the chassis level and returns current

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-29ASample Output:NOTES: To exit monitoring, press the enter key.showIBNodeDes

2 – Switch Command Line InterfaceGroups and Commands2-30 D000025-002 Rev. ASOptions:Sample Output:NOTES: New node name must be enclosed in quotes. Nod

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-31ASample Output:NOTES: The '-all' parameter performs this command

2 – Switch Command Line InterfaceGroups and Commands2-32 D000025-002 Rev. ASSample Output:NOTES: Entering this command with no parameters will display

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-33ANetworkifShowDisplays information for all the network interfaces for the s

Page iv D000025-002 Rev. ASilverStorm 9000 CLI Reference GuideSLinecard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 – Switch Command Line InterfaceGroups and Commands2-34 D000025-002 Rev. ASNOTES: This routine displays the attached network interfaces for debugging

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-35ASample Output:NOTES: This routine spawns a process to send ping packets to

2 – Switch Command Line InterfaceGroups and Commands2-36 D000025-002 Rev. ASSample Output:NOTES: Changing the chassis IP address will drop the connect

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-37AarpShowDisplays the contents of the ARP table.Syntax:Options:Sample Output

2 – Switch Command Line InterfaceGroups and Commands2-38 D000025-002 Rev. ASSample Output:-> hostShowhostname inet address aliases---

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-39AFirmwarefwUpdate (9024 Only)Updates the firmware.Syntax:Options:fwUpdate [

2 – Switch Command Line InterfaceGroups and Commands2-40 D000025-002 Rev. ASSample Output:NOTES: Firmware update works by using ftp to retrieve the fi

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-41AOptions:Sample Output:NOTES: Firmware update works by using ftp to retriev

2 – Switch Command Line InterfaceGroups and Commands2-42 D000025-002 Rev. ASSample Output:NOTES: Firmware update works by retrieving the firmware file

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-43ASyntax:Options:NOTES: Modifies the default update firmware parameters. Ex

D000025-002 Rev. A 1-11 IntroductionThis manual describes the command line interface (CLI) task information for the SilverStorm™ 9024 and Silverstom M

2 – Switch Command Line InterfaceGroups and Commands2-44 D000025-002 Rev. ASshowLastScpRetCodeDisplay the return code from the last SCP Firmware Push.

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-45AbootQueryDisplays boot image version information.Syntax:Options:Sample Out

2 – Switch Command Line InterfaceGroups and Commands2-46 D000025-002 Rev. ASSample Output:NOTES: This command allows the user to set the next boot ima

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-47ASubnet ManagementsmControlStarts and stops the embedded subnet manager.Syn

2 – Switch Command Line InterfaceGroups and Commands2-48 D000025-002 Rev. ASsmConfigConfigure startup parameters of the embedded subnet manager.Syntax

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-49AsmShowLidsDisplay all fabric LID information as known by the subnet manage

2 – Switch Command Line InterfaceGroups and Commands2-50 D000025-002 Rev. ASsmPrioritySet/display the priority of the subnet manager.Syntax:Options:Sa

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-51ANOTES: The sweep rate determines how often the subnet manager scans the fa

2 – Switch Command Line InterfaceGroups and Commands2-52 D000025-002 Rev. ASbmForceSweepForce a fabric sweep by the embedded baseboard manager.Syntax:

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-53ANOTES: Use this command to display multicast group information in the subn

1 – IntroductionTechnical Support1-2 D000025-002 Rev. ASTechnical SupportCustomers should contact their authorized maintenance provider for technical

2 – Switch Command Line InterfaceGroups and Commands2-54 D000025-002 Rev. ASsmShowSubscriptionsDisplay event forwarding (subscription) table in the em

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-55AsmMasterLMCSet/display the Master SM's LMC value to be used on CA por

2 – Switch Command Line InterfaceGroups and Commands2-56 D000025-002 Rev. ASsmShowLidMapDisplay the LID-to-port GUID map for the subnet manager.Syntax

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-57AsmShowMaxLidDisplay the highest LID allocated by the subnet manager.Syntax

2 – Switch Command Line InterfaceGroups and Commands2-58 D000025-002 Rev. ASsmHoqLifeSet/Display the head of queue packet lifetime for switch ports.Sy

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-59AsmShowSMParmsDisplay subnet manager parameters switch lifetime, HOQ lifeti

2 – Switch Command Line InterfaceGroups and Commands2-60 D000025-002 Rev. ASSample Output:NOTES: PKeys are used for partitioning the subnet. Only conf

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-61ANOTES: Use this command to set the SM management key. SM must be offline a

2 – Switch Command Line InterfaceGroups and Commands2-62 D000025-002 Rev. ASsmDefBcGroupSet/display default multicast group configuration.Syntax:Optio

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-63A Valid RATE values are 2(2.5GB), 3(10GB), 4(30GB), 5(5GB), 6(20GB), 7(40G

D000025-002 Rev. A 2-12 Switch Command Line InterfaceOverviewThis section details the usage of the Command Line Interface (CLI) feature for the Silver

2 – Switch Command Line InterfaceGroups and Commands2-64 D000025-002 Rev. ASSample Output:NOTES: Use this command to tune the SM to handle the configu

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-65AsmMaxRetriesSet/display maximum number of SM receive retries.Syntax:Option

2 – Switch Command Line InterfaceGroups and Commands2-66 D000025-002 Rev. ASsmNonRespDropTimeSet/display seconds to wait before dropping a non-respons

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-67AsmLogLevel (9000 MPFD Series Only)Set and display log level settings. Synt

2 – Switch Command Line InterfaceGroups and Commands2-68 D000025-002 Rev. ASsmMasterPingIntervalSet/displays SM ping interval in seconds.Syntax:Option

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-69AsmDbSyncIntervalSet/display how often a Master SM should perform a full sy

2 – Switch Command Line InterfaceGroups and Commands2-70 D000025-002 Rev. ASSample Output:NOTES: Setting values to numbers greater than 19 give an eff

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-71ASample Output:NOTES: When set to 'off', all links come up normal

2 – Switch Command Line InterfaceGroups and Commands2-72 D000025-002 Rev. ASSample Output:NOTES: This command sets the threshold for the number of fab

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-73AsmShowRemovedPortsDisplay ports that have been automatically removed from

2 – Switch Command Line InterfaceCommands and Functional Groups2-2 D000025-002 Rev. AS Can disable user login and passwords. This would allow all use

2 – Switch Command Line InterfaceGroups and Commands2-74 D000025-002 Rev. ASLoglogShowDisplays the log file.Syntax:Options:Sample Output:logShowNone.-

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-75AlogClearClears the log file.Syntax:Options:Sample Output:logConfigureConfi

2 – Switch Command Line InterfaceGroups and Commands2-76 D000025-002 Rev. ASSample Output:NOTES: This is an interactive command to configure log setti

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-77AlogResetToDefaultsRestores the log file default settings.Syntax:Options:Sa

2 – Switch Command Line InterfaceGroups and Commands2-78 D000025-002 Rev. ASlogShowConfigDisplay the current log configuration settings.Syntax:Options

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-79AOptions:Sample Output:-eSend Error severity CSM test message to Syslog.-wS

2 – Switch Command Line InterfaceGroups and Commands2-80 D000025-002 Rev. ASKey ManagementshowKeysDisplay the license keys for the unit.Syntax:Options

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-81AOptions:Sample Output:NOTES: After entering this command a list of availab

2 – Switch Command Line InterfaceGroups and Commands2-82 D000025-002 Rev. ASIbSwitchInfoismPortStatsDisplays link error information associated with ea

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-83ANOTES: Port statistic descriptions: PhysState - The physical state of t

2 – Switch Command Line InterfaceCommands and Functional GroupsD000025-002 Rev. A 2-3ASubnetManagement: InfiniBand subnet manager configuration and ma

2 – Switch Command Line InterfaceGroups and Commands2-84 D000025-002 Rev. ASismPortCountersDisplays a table comparision of transmit, receive and error

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-85A Errors, Rmt - Number of switch relay errors received on the port. For M

2 – Switch Command Line InterfaceGroups and Commands2-86 D000025-002 Rev. ASSample Output:NOTES: This command is best displayed with a terminal width

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-87AismPortSet12xAllows the user to view, set and unset port link width to 12X

2 – Switch Command Line InterfaceGroups and Commands2-88 D000025-002 Rev. ASSample Output:NOTES: This command works only on platforms supporting 12X l

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-89ANOTE: DDR links (5.0) are only available on chassis supporting DDR. This c

2 – Switch Command Line InterfaceGroups and Commands2-90 D000025-002 Rev. ASSample Output:NOTE: Using this command without the enable option displays

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-91ANOTE: Calling this function with no parameters will display the current va

2 – Switch Command Line InterfaceGroups and Commands2-92 D000025-002 Rev. ASNOTE: The option port is case sensitive. If it contains spaces, it must be

2 – Switch Command Line InterfaceGroups and CommandsD000025-002 Rev. A 2-93ASample Output:NOTE: This command works only on chassis supporting 12X link