Qlogic QLA 2310F Specifications download pdf (Page 31)

Sun StorageTek 6140 Array Release Notes, Release 6.2 23

113277-44/README.113277-44

4. Apply the patch with the patchadd command.

patchadd 113277-44

5. Reboot your system.

reboot -- -r

Known Issues

The following sections provide information about known issues and bugs filed

against this product release:

■ “Installation and Initial Configuration Issues” on page 23

■ “Hardware and Firmware Issues” on page 25

■ “Documentation Issues” on page 26

■ “Operational Information” on page 28

If a recommended workaround is available for a bug, it follows the bug description.

Installation and Initial Configuration Issues

This section describes known issues and bugs related to installing and initially

configuring the Sun StorageTek 6140 Array.

Auto Code Sync Feature Can Fail During Controller Replacement

Bug 6757957 – Replacement controllers have recently shipped with 7.x version

firmware on them. If the primary controller is replaced while the array is powered

on and a good secondary controller with 06.xx firmware exists, the replacement

should auto code synchronize to the secondary controller. During a controller

replacement the replacement controller occasionally does not auto code synchronize

to the secondary controller as it should. Instead, the array automatically upgrades to

7.x code.

In such a case. the firmware on the controllers will not match the baseline firmware

on the Common Array Manager Software 6.2.0 CD or download. An alarm will be

generated.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

No comments

Qlogic QLA 2310F Specifications Page 31