Qlogic QLA 2310F Specifications download pdf (Page 32)

24 Sun StorageTek 6140 Array Release Notes • November 2008

Workaround – Download the following patch and follow the patch instructions to

install it on the array.

Patch 140060-01 6xxx Array Firmware -- (Solaris)

Patch 140061-01 6xxx Array Firmware -- (Windows)

Patch 140062-01 6xxx Array Firmware -- (Linux)

Future replacement controllers will be updated to correct the problem.

Array IP Address Not Discovered When Queried

Bug 6734964 – When running controller firmware version 07.10.25.10, the IP address

of the array is not found during discovery. Therefore, the array cannot be accessed

nor managed. This issue occurs when the array’s default IP configuration is used.

The array defaults to an internal static IP address when no Dynamic Host

Configuration Protocol (DHCP) server is available to assign an IP address.

Workaround – The array IP settings need to be configured prior to network

attachment. Perform one of the following tasks:

■ Assign a static IP address to the array.

■ Configure a DHCP server to issue an IP address to the array.

Controller Reboot With Out-of-Band Management

Bug 6754351 – While performing out-of-band management over Ethernet via the

array management software graphical user interface (GUI), it is possible for the

array controller to reboot with an exception.

Workaround – Disconnect the Ethernet cables and switch to in-band management.

Contact Sun Services for information regarding possible controller firmware

updates.

Auto-Negotiation of Ethernet Switches Must be Set to On

The Ethernet ports of the array auto-negotiate for standard 10 and 100 Mbits/second

full duplex connectivity. The ethernet switch that the array’s management path

connects with must have auto-negotiation turned on. If it is not set, the array will

eventually lose visibility from the management host.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

No comments

Qlogic QLA 2310F Specifications Page 32