Fibre Channel SwitchInstallation Manual071-8429-01JANUARY 2007
10 Fibre Channel Switch Installation Manual 29 January 2007Welcome 3. If the correct firmware version is not loaded, refer to the SANbox 5200 Serie
29 January 2007 Fibre Channel Switch Installation Manual 11Port and switch configuration4. If you are configuring a switch with 16 or fewer ports, ski
12 Fibre Channel Switch Installation Manual 29 January 2007Welcome If you wish to terminate this process before reaching the end of the listpress &
29 January 2007 Fibre Channel Switch Installation Manual 13Combining with the QLogic SANbox2 switch15.Save and activate the configuration with the fol
14 Fibre Channel Switch Installation Manual 29 January 2007Welcome • PFR500/600/700 RAID storage• NewsEdit Digital News Production systemThe QLogic
29 January 2007 Fibre Channel Switch Installation Manual 15Resetting the switch manuallythe following settings:• 9600 baud• 8-bit character•1 stop bit
16 Fibre Channel Switch Installation Manual 29 January 2007Welcome 2) Reset Network Config3) Reset User Accounts to Default4) Copy Log Files5) Remo
2 Fibre Channel Switch Installation Manual 29 January 2007Copyright Copyright © 2006 Grass Valley, Inc. All rights reserved. Printed in the United Sta
29 January 2007 Fibre Channel Switch Installation Manual 3ContentsPreface ...
4 Fibre Channel Switch Installation Manual 29 January 2007Contents
29 January 2007 Fibre Channel Switch Installation Manual 5PrefaceGrass Valley Product SupportTo get technical assistance, check on the status of a que
6 Fibre Channel Switch Installation Manual 29 January 2007Preface
29 January 2007 Fibre Channel Switch Installation Manual 7WelcomeYou can use your 8, 16, or 20 port QLogic 5202 SANbox Fibre Channel switch to create
8 Fibre Channel Switch Installation Manual 29 January 2007Welcome Enter administrator modeYou must be in administrator mode to make changes to your
29 January 2007 Fibre Channel Switch Installation Manual 9Verify firmware versionRemoteLogHostAddress (dot-notated IP Address) [10.0.0.254]NTPClientEn
Comments to this Manuals