Qlogic QLogic Fibre Channel Switch User's Guide download pdf (Page 23)

3 – Event Messages

Critical Events

59060-00 03 3-13

[C] [8400.002F] [Switch] [Zoning database of over 3000 zone members may damage

certain non-QLogic switches]

Meaning: The zoning database consists of over 3000 zone members. Not all

vendors support a large configuration like this. Problems could

arise if the fabric includes non-QLogic switches.

[C] [8400.0030] [Switch] [Zoning edit session has been preempted by a zoning merge]

Meaning: A zoning edit session has been preempted by a zone merge. The

zoning edit session has been canceled.

[C] [8400.003C] [Switch] [Network setup is changing - may lose connection - admin being

released automatically]

Meaning: Changes have been made to the network configuration which may

interrupt your connection to the switch.

[C] [8400.003D] [Switch] [Invalid user account_name attempted to log into switch]

Meaning: Invalid user login attempt.

[C] [8600.0009] [PortApp] [Port: port_number] [Link reset (LR) to be performed on port

port_number.]

Meaning: The port will perform a link reset (LR) due to loss of credit issue.

[C] [8600.000A] [PortApp] [Port: port_number] [Link reset (LR) to be performed on port

port_number.]

Meaning: The port will perform a link reset (LR) due to loss of credit issue.

[C] [8600.000B] [PortApp] [Port: port_number] [Link reset (LR) to be performed on port

port_number.]

Meaning: The port will perform a link reset (LR) due to loss of credit issue.

[C] [8600.0013] [PortApp] [Port: port_number] [EV_MEDIA_ID_FAULT event received

invalid vendor data from media device for port port_number]

Meaning: The switch could not read and verify the media module ID. This

may indicate a discovery error or a bad checksum in the serial ID.

Other possibilities include an improperly installed media module or

an internal media I/O hardware fault.

[C] [8600.0014] [PortApp] [Port: port_number] [Invalid vendor data from media device for

port port_number]

Meaning: The switch could not read and verify the media module ID. This

may indicate a discovery error or a bad checksum in the serial ID.

Other possibilities include an improperly installed media module or

an internal media I/O hardware fault.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Qlogic QLogic Fibre Channel Switch User's Guide Page 23