Qlogic QLA22xx board Installation Guide download pdf (Page 9)

FC0153302-00 D 2-1

Section 2

UnixWare 7 Driver Installation

(qlc2200)

2.1

Introduction

This section provides instructions for installing the UnixWare driver under the

following operating system conditions:

❑ Initial installation of UnixWare 7.0 and the qlc2200 driver

❑ Initial installation of UnixWare 7.1 and the qlc2200 driver

❑ Installation of the qlc2200 driver in an already installed UnixWare 7.0 or

7.1 system

If UnixWare is not installed on your system, perform the installation procedures

in section 2.2 (UnixWare 7.0) or section 2.3 (UnixWare 7.1). If UnixWare (7.0 or

7.1) is already installed, perform the installation procedures in section 2.4.

The latest version of the UnixWare driver package is available on the QLogic web

site for UnixWare 7.0 and 7.1. The files in the driver package cannot be read nor

installed from a DOS environment. Be sure to review the README.TXT for both

new and changed information.

The installation of host adapter boards and devices is covered in detail in the

UnixWare documentation. See the following topics for more information.

❑ Using boot-time loadable drivers (Installation Guide)

❑ Adding hard disks and CD-ROM drives (System Administrator’s Guide)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

No comments

Qlogic QLA22xx board Installation Guide Page 9